MOT Status
ExpiredMileage
102,964 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
exhaust backbox heavily corroded
fluid around clutch master cylinder
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
exhaust backbox heavily corroded
fluid around clutch master cylinder
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
offside front tyre perishing
offside rear brake pads deteriorating
offside rear brakes slight binding
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Upper Coil spring mounting corroded but not seriously weakened (2.4.C.3c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Upper Coil spring mounting corroded but not seriously weakened (2.4.C.3c)
Oil leak
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
possible gear oil leak
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside front brake binding (3.7.B.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
How Reliable is the Mazda 626?
Based on 311,592 MOT tests across 41,549 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K558 SKL is a 1992 Mazda 626 in Grey with a 1,991cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 75%.
Across all 1992 Mazda 626 models, the average MOT pass rate is 62.4% with a typical mileage of 114,988 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 626 fails its MOT is parking brake: efficiency below requirements, accounting for 25,332 recorded failures. If you're considering buying K558 SKL, it's worth having these areas checked by a mechanic before committing.
The Mazda 626 typically stays on UK roads for around 37 years. At 34 years old, this Mazda 626 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K558 SKL?
You can check the full history of K558 SKL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K558 SKL registered?
K558 SKL is a 1992 Mazda 626, first registered on 27 October 1992.
Is K558 SKL safe to buy?
The MOT history for K558 SKL shows 12 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K558 SKL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K558 SKL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.