1993 Yamaha XV535

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust noisy (8.1.1 (a))

Rear Direction indicator light intensity reduced (4.4.3 (a))

Rear suspension stiff

Shock absorber has a reduced damping effect (5.3.2 (b))

Registration plate incorrect (0.1 (c))

Stop lamp not working (4.3.1 (a) (ii))

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Front Brake lever cannot be applied smoothly (3.1.3d)

Headlamp aim too low (1.6)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear Motorcycle structure slightly corroded (6.1.1a)

Rear Wheel spoke slightly corroded. (4.2.1b)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front brake disc rusty

Offside Rear Direction indicator deteriorated but function not impaired (1.5.3a)

Rear suspension slightly corroded (2.4.A.2d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp aim too low (1.6)

Horn not loud enough to be heard by another road user (1.7.3a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Front brake disc rusty

Offside Rear Direction indicator deteriorated but function not impaired (1.5.3a)

Rear suspension slightly corroded (2.4.A.2d)

Rear suspension slightly corroded (2.4.A.2d)

Front suspension has excessive corrosion which reduces the strength of a load bearing member or its supporting structure. (2.3.8)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear suspension slightly corroded (2.4.A.2d)

Exhaust noisy (7.1.2)

Front Front suspension assembly slightly corroded. (2.3.1)

Motorcycle structure slightly corroded (6.1.1a)

Steering movement slightly stiff (2.2.1b)

Exhaust noisy (7.1.2)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front suspension assembly slightly corroded. (2.3.1)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear suspension component slightly corroded. (2.4.A.1a)

Rear suspension slightly corroded (2.4.A.2d)

Front Direction indicator incorrect colour (1.5.1b)

Rear reflector on motorcycle missing (1.4.1)