1993 Mazda MX-5

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength + outer. sills. (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength + outer sills. (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated both ball joints (5.3.4 (b) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

underside of vehicle corroded

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced small hole in inner sill not affecting structural ridgdity (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced small hole in inner sill bit not affecting structural rididity (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

exhaust corroded

various under body corrosion

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

both front wiper blades deteriorating

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Items removed from driver's view prior to test ()

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

exhaust corroded

front wiper blades deteriorating

various under body corrosion

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

o/s/r hand brake and foot brake low efforts

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s/f brake binding slightly

Offside rear parking brake recording little or no effort (3.7.B.6a)

Nearside Front brake disc excessively pitted (3.5.1h)

Offside Front brake disc excessively pitted (3.5.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Inner Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)