MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive Rear diff (8.4.1 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge Inner edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge Inner edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Lower Suspension arm ball joint excessively worn rear arm (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn rear arm (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive rear diff (8.4.1 (a) (i))
Tyre worn close to legal limit/worn on edge both rear worn on inner edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b))
Nearside Front Direction indicator incorrect colour (4.4.3 (a))
Nearside Front Lower Suspension arm pin or bush excessively worn front arm, inner bush (5.3.4 (a) (i))
Nearside Rear Upper Suspension arm ball joint excessively worn front arm (5.3.4 (a) (i))
Offside Front Direction indicator incorrect colour (4.4.3 (a))
Offside Front Lower Suspension arm pin or bush excessively worn front arm, inner bush (5.3.4 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Upper Suspension arm ball joint excessively worn front arm (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Lower Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Front Windscreen washer provides insufficient washer liquid both washers (3.5 (a))
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))
Offside Front Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Stop lamp not working (1.2.1b)
Offside Driver's door cannot be opened from outside the vehicle (6.2.B.1b)
Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake pipe slightly corroded front to rear (3.6.B.2c)
Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Sub-frame has excessive play in a pin/bush all rear (2.4.G.2)
Brake pipe slightly corroded front to rear (3.6.B.2c)
Headlamp has a product on the lens but not seriously reducing light output both (1.7.5a)
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Engine covers fitted obscuring some components in the engine bay
Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Under-trays fitted obscuring some underside components
brake pad warning lamp staying on
covers obscuring front to rear brake pads
front brake disc worn thin
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Engine covers fitted obscuring some components in the engine bay
Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Under-trays fitted obscuring some underside components
brake pad warning lamp staying on
covers obscuring front to rear brake pads
front brake disc worn thin
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Engine covers fitted obscuring some components in the engine bay
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
both front tyres cracking on side walls
brake pad warning wire lamp staying on
under trays fiited obscuring both front to rear metal brake pipes
Brake fluid warning lamp illuminated (3.6.G.2)
Nearside Upper Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7)
rear parking (secondary) brakes imbalanced (3.7.B.6b)
rear parking brake recording little or no effort (3.7.B.6a)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Offside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Engine covers fitted obscuring some components in the engine bay
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
both front tyres cracking on side walls
under trays fiited obscuring both front to rear metal brake pipes
Engine covers fitted obscuring some components in the engine bay
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Seat belt stitching slightly frayed (5.2.2b)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Oil leak
Under-trays fitted obscuring some underside components
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside rear inner tyre tread worn very low
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
How Reliable is the BMW X5?
Based on 1,735,343 MOT tests across 137,484 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K600 PMB is a 2003 BMW X5 in Silver with a 2,926cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 65.5%.
Across all 2003 BMW X5 models, the average MOT pass rate is 70.4% with a typical mileage of 95,413 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW X5 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 31,544 recorded failures. If you're considering buying K600 PMB, it's worth having these areas checked by a mechanic before committing.
The BMW X5 typically stays on UK roads for around 25 years. At 23 years old, this BMW X5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K600 PMB?
You can check the full history of K600 PMB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K600 PMB registered?
K600 PMB is a 2003 BMW X5, first registered on 8 July 2003.
Is K600 PMB safe to buy?
The MOT history for K600 PMB shows 29 tests with a 65.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K600 PMB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K600 PMB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.