1992 Rover Mini

Nearside Front Play in steering rack inner joint(s) ()

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Play in steering rack inner joint(s) ()

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps Both rear (4.7.1 (b) (ii))

Steering column top bearing slightly worn (2.2.2 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front Upper Axle swivel joint has slight play (2.5.A.3b)

Nearside Front Shock absorber has an excessively worn bush (2.7.4)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor pan (6.1.B.2)

Offside Front Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Upper Axle swivel joint has slight play (2.5.A.3b)

both front tyres perishing

nearside rear tyre perishing.

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Rear Rear fog lamp not working (1.3.2b)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

corosion on front valance, nearside sill and panel in front of rear subframe

Offside Front Suspension has inadequate clearance with the bump stop (2.4.A.1a)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake hose slightly deteriorated (3.6.B.4d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

corosion on front valance outer sills and rear subframe mounts

corosion on panel infront of rear subframe

nearside front suspension has minimal clearance with bump stop

very bad corosion on offside front outer sill panel

Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Sub-frame attachment rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Ref. 411678936412

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Front valence corrosion.

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)