2010 Ford S-max

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Upper Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Lower Suspension arm corroded but not seriously weakened arms (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Play in steering rack inner joint(s) ()

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Exhaust mounting defective bracket broken (6.1.2 (a))

Rear Lower Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Front Brake disc worn, but not excessively both sides (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust mounting defective bracket broken (6.1.2 (a))

Offside Rear Seat belt flexible stalk damaged (7.1.2 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arms both sides (5.3.4 (a) (i))

Rear Upper Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

EXHAUST SYSTEM RUSTY

Rear Tyre slightly damaged/cracking or perishing BOTH (5.2.3 (d) (ii))

EXHAUST SYSTEM RUSTY

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps BOTH (4.7.1 (b) (ii))

Rear Tyre slightly damaged/cracking or perishing BOTH (5.2.3 (d) (ii))

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit inner band (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)