MOT Status
ExpiredMileage
186,195 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside front brake binding (3.7.B.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Front Power steering pipe(s) or hose(s) leaking (2.3.3b)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear coil spring incomplete (2.4.C.1a)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside front brake binding (3.7.B.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear coil spring incomplete (2.4.C.1a)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
rear brake application uneven (3.7.B.2)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Front bumper insecure
Fuel pipe leaking (7.2.3)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Upper Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Side repeater not working (1.4.A.2c)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Macpherson strut worn and seriously weakened (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Front position lamp(s) excessively damaged so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear fog lamp not working (1.3.2b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Registration plate lamp not working (1.1.5c)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Exhaust engine idle speed too high (7.3.D.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pipe excessively corroded (3.6.B.2c)
Service brake: efficiency below requirements (3.7.B.7)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K616 FLS is a 1993 Mazda 323 in Blue with a 1,598cc petrol engine. This vehicle has been through 6 MOT tests with a personal pass rate of 33.3%.
Across all 1993 Mazda 323 models, the average MOT pass rate is 61.3% with a typical mileage of 95,315 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying K616 FLS, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 33 years old, this Mazda 323 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K616 FLS?
You can check the full history of K616 FLS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K616 FLS registered?
K616 FLS is a 1993 Mazda 323, first registered on 1 January 1993.
Is K616 FLS safe to buy?
The MOT history for K616 FLS shows 6 tests with a 33.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K616 FLS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K616 FLS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.