MOT Status
ExpiredMileage
163,236 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Subframe mounting prescribed area is excessively corroded CHASSIS AN BOOT FLOOR (2.4.A.3)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Offside Steering rack gaiter split (2.2.D.2d)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
movement in n/side steering rack end
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Rear fog lamp not working (1.3.2b)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Nearside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame has excessive play in a pin/bush (2.4.G.2)
Offside Rear fog lamp not working (1.3.2b)
Offside Stop lamp not working (1.2.1b)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Sub-frame has slight play in a pin/bush (2.4.G.2)
Nearside Rear Lower Shock absorber has an excessively worn bush (2.7.4)
Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Offside Headlamp aim too high (1.8)
Offside Rear fog lamp not working (1.3.2b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Steering system excessively rough (2.2.D.1)
Headlamp not in good working order (not working) (1.2.4a)
Nearside Front Sub-frame corroded and seriously weakened (2.4.G.1)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Rear Rear fog lamp not working (1.3.2b)
Front Sub-frame corroded and seriously weakened (2.4.G.1)
Front Sub-frame fractured (2.4.G.1)
Nearside Rear Shock absorber has an excessively worn bush (2.7.4)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Rear fog lamp not working (1.3.2b)
Steering system has excessive free play detected at the steering wheel (steering rack fitted) (2.2.A.1b)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
How Reliable is the Peugeot 205?
Based on 591,894 MOT tests across 102,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K625 KPW is a 1993 Peugeot 205 in Blue with a 1,769cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 1993 Peugeot 205 models, the average MOT pass rate is 62.6% with a typical mileage of 98,489 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 205 fails its MOT is brake pipe excessively corroded, accounting for 43,839 recorded failures. If you're considering buying K625 KPW, it's worth having these areas checked by a mechanic before committing.
The Peugeot 205 typically stays on UK roads for around 40 years. At 33 years old, this Peugeot 205 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K625 KPW?
You can check the full history of K625 KPW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K625 KPW registered?
K625 KPW is a 1993 Peugeot 205, first registered on 31 March 1993.
Is K625 KPW safe to buy?
The MOT history for K625 KPW shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K625 KPW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K625 KPW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.