1992 Mazda MX-5

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Position lamp not working Both (4.2.1 (a) (ii))

Offside Front Hydraulic brake calliper leaking (1.1.16 (b) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material Both (1.1.11 (c))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

underbody covered with seal

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material Front to rear pipe (1.1.11 (c))

Rear Lower Both rear sills rusting but solid

Emissions unable to be completed No cat fitted (8.2.1.2 (d))

Exhaust catalytic converter missing where one was fitted as standard Cat missing (8.2.1.1 (a))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear fog lamp not working (4.5.1 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material Front to rear pipe (1.1.11 (c))

Rear Lower Both rear sills rusting but solid

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits No cat fitted (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Oil leaking excessively from engine From Cam angle sensor seal (8.4.1 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Front Registration plate inscription illegible (0.1 (b))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.2.2 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)

ADVISE EXHAUST NOT STANDARD FIT

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)