MOT Status
ValidMileage
230,322 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Upper Outline marker lamp not working (4.2.1 (a) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Leaf spring showing signs of wear
Nearside Rear Parking brake requirements only just met. It would appear that the braking system requires adjustment or repair
Offside Rear Leaf spring showing signs of wear
Oil leak, but not excessive (8.4.1 (a) (i))
Road wheels are corroded
Central Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Leaf spring showing signs of wear
Nearside Rear Parking brake requirements only just met. It would appear that the braking system requires adjustment or repair
Offside Rear Leaf spring showing signs of wear
Oil leak, but not excessive (8.4.1 (a) (i))
Road wheels are corroded
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Road wheels are corroded
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Road wheels are corroded
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive suspension mount (5.3.6 (a) (i))
radiator corroded
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive suspension mount (5.3.6 (a) (i))
centre exhaust mounting missing
radiator corroded
Central Exhaust mounting defective (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive front and rear of wheel arch (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))
radiator corroded
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger mount (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring mount area (5.3.6 (a) (i))
Central Exhaust mounting defective (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive front and rear of wheel arch (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))
radiator corroded
Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front spring hanger (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear spring hanger (5.3.6 (a) (i))
Nearside Front Brake pipe connection leaking on a hydraulic braking system under drivers seat area (1.1.11 (b) (ii)) DANGEROUS
Central Exhaust system insecure mounts broken x3 (6.1.2 (a))
Nearside Front Headlamp aim too high dipping in wrong direction (4.1.2 (a))
Offside Front Headlamp aim too high dipping wrong direction (4.1.2 (a))
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively drivers (8.2.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on main beam (1.7.5a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Vehicle structure has slight corrosion (6.1.A.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Registration plate lamp not working (1.1.C.1d)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring corroded (2.4.C.1b)
Nearside Front Lower Brake pipe slightly corroded (3.6.B.2c)
Rear Direction indicator deteriorated, but still visible from a reasonable distance (1.4.A.2e)
both front and o/s/r tyres slightly perished
n/s/f upper wing mirror damaged
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
fault on side lights switch.(seperate switch for side lights)
All position lamps not working (1.1.A.3b)
How Reliable is the Fiat Hymer?
Based on 25,281 MOT tests across 1,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K698 JHE is a 2003 Fiat Hymer in White with a 2,500cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 70%.
Across all 2003 Fiat Hymer models, the average MOT pass rate is 75.9% with a typical mileage of 48,875 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Hymer fails its MOT is headlamp aim beam image kick up to the offside, accounting for 531 recorded failures. If you're considering buying K698 JHE, it's worth having these areas checked by a mechanic before committing.
The Fiat Hymer typically stays on UK roads for around 40 years. At 23 years old, this Fiat Hymer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of K698 JHE?
You can check the full history of K698 JHE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K698 JHE registered?
K698 JHE is a 2003 Fiat Hymer, first registered on 1 September 2003.
Is K698 JHE safe to buy?
The MOT history for K698 JHE shows 30 tests with a 70% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K698 JHE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K698 JHE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.