1992 Honda CBR600F

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Brake disc(s) slightly worn beginning to crack between holes (3.2.A1l)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Exhaust slightly deteriorated (7.1.1a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Exhaust is leaking and excessively noisey (7.1.1b)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Drive chain slightly loose (6.2.1d)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Steering movement slightly 'notchy' (2.2.1a)

cam chain noisy

front side light inop

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly stiff (2.2.1b)

Rear Brake pedal insecure (3.1.2a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly stiff (2.2.1b)

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering headbearing has slight free play (2.2.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Rear mono-shock pivot seized (2.4.B.4)

Drive chain excessively tight (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Floor brake test indicates a sticking brake (3.3.C2c)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c) DANGEROUS

Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a) DANGEROUS

Front Floor brake test indicates a binding brake (3.3.C2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Steering movement slightly 'notchy' (2.2.1b)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear suspension lightly rubbing not affecting the movement of the rear suspension (2.4.A.3a)

left front footrest rubber is split and starting to break up.

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))