1993 Honda Cbr

Front Brake disc(s) has excessive run out (3.2.A1m)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Hydraulic brake control feels spongy (3.1.4a)

Rear Brake pedal is damaged and the brake cannot be readily applied (3.1.3c)

Rear Direction indicators not working (1.5.1c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Front Brake pipe likely to be fouled or trapped by moving parts (3.2.B2c) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust noisy (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Exhaust noisy (7.1.2)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

front brake hose from master cylinder to junction touching on fairing bracket but not damaged or restricting movement

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear wheel bearings have excessive free play (2.4.A.2c)

right hand rear indicator insecure slight misalignment on steering