1993 Rover Mini

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Front Registration plate does not conform to the specified requirements (0.1 (d))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Headlamp aim too high (4.1.2 (a))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Headlamp aim too high (4.1.2 (a))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Front Brake pad(s) wearing thin (3.5.1g)

o/s/f a post starting to rust slightly

oil leak

slight underbody corrosion

Corrosion on n/s/f inner wheel arch, but not within 30cm of load bearing component

Corrosion on o/s/f door pillar, but not within 30cm of load bearing component

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Oil leak

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Subframe mounting prescribed area is fractured (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Corrosion on n/s/f inner wheel arch, but not within 30cm of load bearing component

Corrosion on o/s/f door pillar, but not within 30cm of load bearing component

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Oil leak

Rear valance cracked below bumper

Exhaust noisy (7.1.4)

bottom of offside A post corroded and holed

nearside front floor corroded

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Front Sub-frame locating pin incorrectly positioned (2.4.G.3a)

Offside Rear fog lamp not working (1.3.2b)

Exhaust noisy (7.1.4)

bottom of offside A post corroded and holed

nearside front floor corroded

Body has slight corrosion (6.1.B.2)

Nearside Inner Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Headlamp aim too low (1.8)

Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Body has slight corrosion (6.1.B.2)

Nearside Inner Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Rear Brake pipe slightly corroded (3.6.B.2c)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Track rod end ball joint has excessive play (2.2.B.1f)

Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Oil leak