1992 Volkswagen Golf

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear fog lamp not working (1.3.2b)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc slightly pitted (3.5.1h)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc slightly pitted (3.5.1h)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside floor corroded and holed but not within a specific area

REar axle bushes starting to split

Rear wheel bearing has slight play (2.6.2)

Shock absorber has a light misting of oil (2.7.3)

Shock absorber has a slightly reduced damping effect (2.7.5)

Sills and chassis corroded

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Fuel system component leaking (7.2.3)

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside floor corroded and holed but not within a specific area

Offside Front Direction indicator not working (1.4.A.2c)

REar axle bushes starting to split

Rear wheel bearing has slight play (2.6.2)

Shock absorber has a light misting of oil (2.7.3)

Shock absorber has a slightly reduced damping effect (2.7.5)

Sills and chassis corroded

Stop lamp not working (1.2.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

FRont tyres wearing on inner edges

Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear axle bushes perishing

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Brake load sensing valve linkage seized (3.6.E.3)

Brake pipe excessively corroded (3.6.B.2c)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Registration plate lamp not working (1.1.5c)

Rear axle bushes splitting