1992 Honda C90

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Fork yoke deformed but serviceable (2.2.2 (d) (i))

Front Steering linkage ball joint worn, but not excessively (2.1.3 (b) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Shock absorber has slight external damage to the casing (5.3.2 (b))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering headbearing has slight free play (2.2.2)

Front Front suspension spring worn but not seriously weakened (2.3.2b)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Handlebar mounting slightly deteriorated (2.1.1d)

Handlebar slightly corroded. (2.1.1b)

Rear Rear suspension component slightly corroded. (2.4.A.1a)

Wheel alignment slightly misaligned. (2.5.1)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear wheel bearings have slight free play (2.4.A.2c)

Wheel alignment slightly misaligned. (2.5.1)

Direction indicators not working (1.5.1c)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Headlamp aim too high (1.6)

Horn not loud enough to be heard by another road user (1.7.3a)

Riders seat insecure (6.2.1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Stop lamp affected by the operation of the horn (1.3.2)

Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear wheel bearings have slight free play (2.4.A.2c)

Wheel alignment slightly misaligned. (2.5.1)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear wheel bearings have slight free play (2.4.A.2c)

Direction indicators not working (1.5.1c)

Drive chain excessively loose (6.2.1d)

Front Roller brake test indicates a sticking brake (3.3.A1a)

Horn not loud enough to be heard by another road user (1.7.3a)

Stop lamp remains on when the brake is released (1.3.1e)

Front Wheel spoke slightly corroded. (4.2.1b)

Rear wheel bearings have slight free play (2.4.A.2c)

low air presure in rear tyre

Drive chain worn to excess (6.2.1e)

Stop lamp remains on when the brake is released (1.3.1e)

Throttle operating incorrectly (6.2.1f)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear wheel bearings have slight free play (2.4.A.2c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear wheel bearings have slight free play (2.4.A.2c)

handle bars slighty off centre