1993 Fiat Panda

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mounting (5.3.6 (a) (i))

Offside Rear Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Seat belt slightly damaged (7.1.2 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Exhaust has a major leak of exhaust gases manifold area (6.1.2 (a))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component mounting repair covered in underseal inner and outer sills, chassis rails,boot floor (5.3.6 (a) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor pan (6.2.2 (d) (i))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake hose slightly deteriorated offside and nearside (3.6.B.4d)

Rear axle corroded

offside and nearside inner sills and floor pans corroded

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Horn not working (1.6.2a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp aim too low (1.8)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp aim too far to the left (1.8)

Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Registration plate lamp not working (1.1.C.1d)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Horn not working (1.6.2a)

Nearside Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Horn not working (1.6.2a)

Nearside Rear Lower Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Lower Shock absorber has an excessively worn bush (2.7.4)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

heavy welding under car,welding to a poor standard

offside rear wheel arch repair

repair to corrosion in boot,welding to a poor standard

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Vehicle structure has an inadequate repair which adversely affects braking or steering (6.1.A.1)

Vehicle structure has an inadequate repair which adversely affects braking or steering (6.1.A.1)

Nearside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)