MOT Status
ExpiredMileage
120,774 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brakes imbalanced across an axle (3.7.B.5b)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Fuel tank leaking (7.2.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Front registration plate deteriorated (6.3.1d)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
rear wiper arm damaged
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Anti-roll bar insecure (2.4.G.1)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Headlamp aim too low (1.8)
Offside Rear Anti-roll bar insecure (2.4.G.1)
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body has a sharp edge caused by damage (6.1.C.1)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
coil spring corroded (2.4.C.1b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Anti-roll bar corroded but not seriously weakened (2.4.G.1)
FUEL LINES BADLY CORRODED.
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Shock absorber has slight corrosion to the casing (2.7.2a)
Suspension arm corroded but not seriously weakened (2.4.G.1)
coil spring corroded (2.4.C.1b)
fuel pipes corroded
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K961 NTY is a 1992 Mazda 323 in Red with a 1,324cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 47.1%.
Across all 1992 Mazda 323 models, the average MOT pass rate is 62.0% with a typical mileage of 98,243 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying K961 NTY, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 34 years old, this Mazda 323 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K961 NTY?
You can check the full history of K961 NTY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K961 NTY registered?
K961 NTY is a 1992 Mazda 323, first registered on 1 August 1992.
Is K961 NTY safe to buy?
The MOT history for K961 NTY shows 17 tests with a 47.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K961 NTY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K961 NTY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.