1993 Rover Mini

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Front Registration plate incorrect (0.1 (c))

Front Windscreen washer not working (3.5 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Seat belt missing (7.1.2 (a))

Nearside Front Sub-frame pin or bush excessively worn front bush (5.3.4 (a) (i))

Nearside Side repeater missing (4.4.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Seat belt missing (7.1.2 (a))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Side repeater missing (4.4.1 (a) (ii))

Rear Registration plate incorrect (0.1 (c))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm damaged but not seriously weakened (5.3.3 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Upper Suspension component ball joint has slight play (5.3.4 (a) (i))

Direction indicators not working (1.4.A.2c)

Emissions not tested over heating (7.3.A.1)

Indicator switch insecure (1.4.A.1)

Indicator switch insecure (1.4.A.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear wheel bearing rough when rotated (2.6.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Direction indicators incorrect colour (1.4.A.2f)

Offside Headlamp aim too high (1.8)

Offside Rear fog lamp not working (1.3.2b)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Front Direction indicators slightly discoloured (1.4.A.2f)

front panel corroded and holed

rear subframe slightly corroded

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Horn not working (1.6.2a)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Sub-frame attachment rubber mounting bonding deteriorated resulting in excessive movement (2.4.G.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)