MOT Status
ExpiredMileage
130,382 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Inner Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Suspension component corroded but not seriously weakened ALL (5.3.3 (b) (i))
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Most Rear (5.3.4 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Exhaust mounting defective (6.1.2 (a))
Nearside Rear Inner Axle swivel pins and bushes swivel pin and/or bush slightly worn Most Front (5.1.2 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Most Rear (5.3.4 (a) (i))
Offside Front Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))
Offside Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Inner Axle swivel pins and bushes swivel pin and/or bush slightly worn Most Front (5.1.2 (b) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension component corroded but not seriously weakened ALL (5.3.3 (b) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both NS & OS (1.1.14 (a) (ii))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both NS & OS front (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Headlamp has a product on the lens but not seriously reducing light output both NS & OS (4.1.4 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both NS & OS (5.1.2 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear both sides (5.3.4 (a) (i))
Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))
Nearside Rear Exhaust mounting defective (6.1.2 (a))
Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement damper bush (5.3.4 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both sides (5.1.2 (b) (i))
Service brake binding but not excessively OSF & NSR (1.2.1 (f))
Vehicle structure is corroded but structural rigidity is not significantly reduced and undersealed (6.1.1 (c) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear boomerang arm (5.3.4 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear boomerang arm (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear boomerang arm (5.3.4 (a) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear boomerang arm (5.3.4 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Child Seat fitted not allowing full inspection of adult belt ()
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
all front suspension components corroded
all rear suspension components corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Front wheel bearing rough when rotated (2.5.A.2)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill near trailing arm mounting (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill near trailing arm mounting (2.4.A.3)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Items removed from driver's view prior to test
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Upper coil spring broken (2.4.C.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
o/s/r tyre low on tread
rear pads low
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KA05 ALU is a 2005 Mazda 6 in Grey with a 1,999cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 81%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying KA05 ALU, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KA05 ALU?
You can check the full history of KA05 ALU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KA05 ALU registered?
KA05 ALU is a 2005 Mazda 6, first registered on 30 June 2005.
Is KA05 ALU safe to buy?
The MOT history for KA05 ALU shows 21 tests with a 81% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KA05 ALU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KA05 ALU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.