2005 Mazda 6

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement inner bush (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

parking brake lever has low reserve travel, possibly indicating the need for adjustment or repair

Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced inner sill (6.1.1 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced inner sill (6.1.1 (a) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

rear brake pads getting low

both rear tyres slightly distorted on inner edges

under-trays and engine covers fitted

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

both rear tyres slightly distorted on inner edges

nearside front brake sticking slightly

under-trays and engine covers fitted

Battery insecure (1.9.1)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside rear sill (6.1.B.2)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Parking brake lever has no reserve travel (3.1.6b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement all (2.4.G.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit 2mm and mis-shaped (4.1.E.1)

Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement all (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit 2mm and mis-shaped (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear exhaust hanger broken

under trays fitted

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

boot full

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)