2009 Fiat 500

Offside Front tyre worn heavily on inner edge

Brakes imbalanced across an axle by more than 50% 54% (1.2.1 (b) (ii)) DANGEROUS

Offside Front tyre worn heavily on inner edge

Nearside Front Suspension arm pin or bush excessively worn rear inner bush (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust mounting defective Clamp at flexi section deteriorated and detached. (6.1.2 (a))

Rear Exhaust rear silencer internal baffles collapsed.

Driver's view Items removed from driver's view prior to test (3.1 (a) (ii))

Nearside Rear Parking (secondary brake) grabbing slightly (1.3.1 (c))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Parking (secondary brake) grabbing slightly (1.3.1 (c))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm pin or bush excessively worn wishbone bush (5.3.4 (a) (i))

Offside Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front wear on tyre inner edge, but no ply or cords visible

Under-trays fitted obscuring some underside components

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front wear on tyre inner edge, but no ply or cords visible

Offside Registration plate lamp not working (1.1.C.1d)

Under-trays fitted obscuring some underside components

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front registration plate with character(s) which are not the correct height (6.3.4a)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Offside rear brake binding Drums fitted (3.7.B.1)

Rear registration plate with character(s) which are not the correct height (6.3.4a)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Front headlamp slightly insecure

Nearside Front wear on tyre inner edge, but no ply or cords visible

Rear Exhaust has a minor leak of exhaust gases joint (7.1.2)

Under-trays fitted obscuring some underside components

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Front registration plate with character(s) which are not the correct height (6.3.4a)

Rear registration plate with character(s) which are not the correct height (6.3.4a)

rear exhaust box corroded rear exhaust clamp corroded but not leaking gases

rear silencer excessivly corroded

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Headlamp aim too low (1.8)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Headlamp aim too low (1.8)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

rear silencer excessivly corroded