MOT Status
ExpiredMileage
85,845 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material from flexi (1.1.11 (c))
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material from flexi (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Fuel system component leaking excessively or a risk of fire Fuel Filter Leaking (6.1.3 (b) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Outer Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Tie bar/rod has excessive play in a pin/bush DROP-LINK (2.4.G.2)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Tie bar/rod has excessive play in a pin/bush DROP-LINK (2.4.G.2)
Front Headlamp aim too low BOTH (1.8)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake pedal has insufficient reserve movement (3.3.A.5)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front position lamp(s) not working (1.1.A.3b)
How Reliable is the Chevrolet Lacetti?
Based on 203,671 MOT tests across 15,288 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KA57 CNC is a 2007 Chevrolet Lacetti in Silver with a 1,598cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 57.9%.
Across all 2007 Chevrolet Lacetti models, the average MOT pass rate is 69.7% with a typical mileage of 53,993 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chevrolet Lacetti fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 8,485 recorded failures. If you're considering buying KA57 CNC, it's worth having these areas checked by a mechanic before committing.
The Chevrolet Lacetti typically stays on UK roads for around 21 years. At 19 years old, this Chevrolet Lacetti is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KA57 CNC?
You can check the full history of KA57 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KA57 CNC registered?
KA57 CNC is a 2007 Chevrolet Lacetti, first registered on 30 December 2007.
Is KA57 CNC safe to buy?
The MOT history for KA57 CNC shows 19 tests with a 57.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KA57 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KA57 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.