2008 Chevrolet Matiz

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Front Oil leak, but not excessive sump corroded (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced outer sills both sides (6.1.1 (c) (i))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Offside Front Lower Suspension locking device ineffective pin cut off infront of nut (5.3.6 (b))

Offside Rear Brake cable insecure (1.1.15 (c))

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Front Oil leak, but not excessive sump corroded (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced outer sills both sides (6.1.1 (c) (i))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced outer sill (6.1.1 (d) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Nearside Front Passenger's seat with a defective structure (6.2.6 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Service brake lagging in operation (1.2.1 (d))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill has hole (5.3.6 (a) (i))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Front Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS

Front Brakes imbalanced across an axle by more than 50% Axle 1 (1.2.1 (b) (ii)) DANGEROUS

Nearside Rear Passenger's seat insecure back rest not fixed in (6.2.6 (a) (ii)) DANGEROUS

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Oil leak, but not excessive sump corroded (8.4.1 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced outer sills (6.1.1 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trail arm bush (5.3.4 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits 4.03% (8.2.1.2 (b))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp aim too low (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Brake performance not tested (3.7.A.1)

Offside Headlamp aim too low (1.8)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Nearside rear brake binding (3.7.B.1) DANGEROUS

Offside rear brake binding (3.7.B.1) DANGEROUS

Nearside Front wheel bearing has slight play (2.5.A.3c)

l.s.f

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)