MOT Status
ExpiredMileage
103,593 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened all arms are corroded (5.3.3 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened all arms are corroded (5.3.3 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Service brake binding but not excessively n/s/f and o/s/r (1.2.1 (f))
Nearside Rear Brake hose excessively chafed (1.1.12 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened all arms are corroded (5.3.3 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened all arms are corroded (5.3.3 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Service brake binding but not excessively n/s/f and o/s/r (1.2.1 (f))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))
Nearside Front Brake pipe inadequately clipped or supported flexi (1.1.11 (d) (i))
Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive 30 cm cill (5.3.6 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources flickering (4.7.1 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear exhaust corroded
Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Rear Towbar attachment insecure bolts lose (6.1.6 (c) (i))
Rear Towbar component excessively damaged bent (6.1.6 (a))
Rear Towbar with an unsafe modification to primary components wood used as spacer on tow ball (6.1.6 (g) (ii)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))
Nearside Front Brake pipe inadequately clipped or supported flexi (1.1.11 (d) (i))
Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive 30 cm cill (5.3.6 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources flickering (4.7.1 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear exhaust corroded
Headlamp aim projected beam image is obviously incorrect lenses poor maybe obscuring pattern . (4.1.2 (c))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Trailer electrical socket likely to become detached plug not attached to bracket (4.10 (a) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened disc badly scored from worn out brack pads (1.1.14 (a) (ii))
Nearside Front Brake pipe inadequately clipped or supported flexi pipe not secured properly (1.1.11 (d) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing also has nail in it . (5.2.3 (d) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened ALL front (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened All rear (5.3.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened ALL front (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened All rear (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened all front (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened all rear (5.3.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
nearside front tyre worn on edge
offside rear tyre worn on edge
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
nearside front tyre worn on edge
offside rear tyre worn on edge
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
offside front tyre worn on edge
rear exhaust hangger held up by wire
Front Brake pad(s) wearing thin (3.5.1g)
nearside front tyre perished
nearside headlight poor image
offside front tyre perished
offside headlight poor image
rear exhaust hangger held up by wire
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
corrosion underside of vehicle
exhaust deteriorated
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
brake pedal rubber slightly worn
corrosion throughout underside of vehicle
nearside headlamp pattern faded
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Engine covers fitted obscuring some components in the engine bay
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
brake pedal rubber slightly worn
corrosion throughout underside of vehicle
nearside headlamp pattern faded
offside front tyre on 1.6mm legal limit completely round centre of tread
Nail in nearside front tyre
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too far to the right (1.8)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KB05 OPK is a 2005 Mazda 6 in Blue with a 1,999cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 68.2%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying KB05 OPK, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KB05 OPK?
You can check the full history of KB05 OPK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KB05 OPK registered?
KB05 OPK is a 2005 Mazda 6, first registered on 27 May 2005.
Is KB05 OPK safe to buy?
The MOT history for KB05 OPK shows 22 tests with a 68.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KB05 OPK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KB05 OPK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.