MOT Status
ExpiredMileage
236,079 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear (6.1.1 (c) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Service brake efficiency below requirements (1.2.2 (a) (i))
Windscreen in an unacceptable condition (3.2 (c) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge worn on outer edge (5.2.3 (e))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
O/S INNER SILL RUSTY
O/S REAR BODY RUSTY BUT NOT IN PERSCRIBED AREA
Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Rear Registration plate inscription illegible (0.1 (b))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Central Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Tie bar/rod locating pin insecure (2.4.G.3a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Registration plate lamp not working (1.1.C.1d)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside passenger door cannot be opened from outside the vehicle (6.2.B.1c)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar insecure (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nail in nearside rear tyre
Nail in offside rear tyre
Nearside front brake juddering slightly (3.7.A.2b)
O/S wiper blade split
Offside front brake juddering slightly (3.7.A.2b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Stop lamp not working (1.2.1b)
Nail in nearside rear tyre
Nail in offside rear tyre
Nearside front brake juddering slightly (3.7.A.2b)
O/S wiper blade split
Offside front brake juddering slightly (3.7.A.2b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Horn not working (1.6.2a)
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Anti-roll bar synthetic bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Registration plate lamp not working (1.1.C.1d)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KC03 VVT is a 2003 Mercedes-benz Vito in Silver with a 2,151cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2003 Mercedes-benz Vito models, the average MOT pass rate is 66.0% with a typical mileage of 105,209 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying KC03 VVT, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 23 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KC03 VVT?
You can check the full history of KC03 VVT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KC03 VVT registered?
KC03 VVT is a 2003 Mercedes-benz Vito, first registered on 25 June 2003.
Is KC03 VVT safe to buy?
The MOT history for KC03 VVT shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KC03 VVT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KC03 VVT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.