2004 Lexus IS200

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sill. (7.1.1 (a) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Lower rear hub rose bush. (5.3.4 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust system insecure (6.1.2 (a))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Front Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Sub-frame attachment bracket/mounting likely to become detached (5.3.3 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Fuel Pipe/s corroded filler pipes ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

sill & under covers fitted preventing full check

Nearside Front Position lamp not working (4.2.1 (a))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer sidewall damaged, deep cuts in tyre (5.2.3 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge cracked & perished (5.2.3 (e))

Nearside Rear Nail in tyre ()

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Fuel Pipe/s corroded filler pipes ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

sill & under covers fitted preventing full check

Offside Front tyre has small splits on inner sidewall (not to cords etc)

Rear inner sills Rear chassis leg and rear sub frame mounts all corroding but no holes

Nearside Rear Body has slight corrosion inner sill (6.1.B.2)

Offside Rear Body has slight corrosion inner sill (6.1.B.2)

Unable to see rear pads

Under trays fitted

Rear Tyre worn close to the legal limit both (4.1.E.1)

engine covers and under trays fitted, nail in n/s/r tyre

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Both front tyre' are worn heavy on inner edge's

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Both front tyre' are worn heavy on inner edge's

Cant see rear brake pad's, suspect are low

Engine covers fitted obscuring some components in the engine bay

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Under-trays fitted obscuring some underside components

sill covers fitted

Nail in nearside front tyre

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)