2007 Ford Focus C-max

Front bonnet opens by other means

Front Emissions unable to be completed flexi pipe broken (8.2.2.2 (e))

Nearside Front Lower Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Front bonnet opens by other means

Nearside Rear Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Nearside Front Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

sill covers fitted

Nearside Front Headlamp aim not tested (4.1.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge on limit (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

sill covers fitted

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

slight oil leak

Nearside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords worn inner edge also (5.2.3 (d) (i))

Offside Rear Suspension arm pin or bush excessively worn trailing arm bush (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

slight oil leak

sill covers fitted

Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

sill covers fitted

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

BOTH CENTRE AND REAR HEAT SHIELD

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

tyres worn and perished on inner edges

Headlamp aim too low both (1.8)

Nearside Front position lamp(s) not working (1.1.A.3b)

Centre section exhaust outer skin slightly deteriorated

Child seat fitted not allowing full inspection of adult belt

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

n/s/f tyre slightly worn on inner rdge

o/s/f tyre badly worn on inner edge but no cords showing

Engine covers fitted obscuring some components in the engine bay

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Items removed from driver's view prior to test

Nail in nearside rear tyre

Offside front and Nearside rear valves perished

Under-trays fitted obscuring some underside components

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on main beam (1.7.5a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Offside Front Headlamp not working on main beam (1.7.5a)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)