MOT Status
ExpiredMileage
144,649 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Advanced corrosion to rear subframe & suspension arms
N/S door mirror damaged
Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim not tested (4.1.2 (b))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Advanced corrosion to rear subframe & suspension arms
N/S door mirror damaged
N/S REAR METAL BRAKE PIPE CORRODED
REAR SUBFRAME CORRODED
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn Forward (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn Rear (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
N/S REAR METAL BRAKE PIPE CORRODED
REAR SUBFRAME CORRODED
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front registration plate deteriorated but not likely to be misread & rear (6.3.1d)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive & rear floor (5.2.6)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive & rear floor (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Front wheel bearing has excessive play (2.5.A.3c)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front registration plate deteriorated but not likely to be misread & rear (6.3.1d)
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive & rear floor (5.2.6)
Nearside Rear Brake pad(s) wearing thin & over heated (3.5.1g)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive & rear floor (5.2.6)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
General under body corrosion.
Nearside Rear Inner Tyre worn close to the legal limit edge 2mm (4.1.E.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear body damage
Oil leak ()
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear rear brake application uneven 32% (3.7.B.2)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt front (2.4.G.2)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
General under body corrosion.
Nearside Front Tyre inner edge worn smooth.
Nearside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Nearside Rear Inner Tyre worn close to the legal limit edge 2mm (4.1.E.1)
Nearside Rear Slightly binding.
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Front Tyre inner edge worn smooth.
Offside Front Tyre worn close to the legal limit 2mm (4.1.E.1)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear body damage
Oil leak ()
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front front brake binding (3.7.B.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear reflector missing taped over (1.5.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Rear rear brake binding (3.7.B.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Centre Rear Upper Stop lamp not working (1.2.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Under-trays fitted obscuring some underside components
N/S/F tyre sidewall weakened due to being run with under inflated tyre.
Nail in nearside front tyre
n/s/r tyre outer wall chuncked but no cord exposed
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KC57 YLZ is a 2007 Mazda 6 in Red with a 1,998cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 63.2%.
Across all 2007 Mazda 6 models, the average MOT pass rate is 73.6% with a typical mileage of 75,411 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying KC57 YLZ, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 19 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KC57 YLZ?
You can check the full history of KC57 YLZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KC57 YLZ registered?
KC57 YLZ is a 2007 Mazda 6, first registered on 2 October 2007.
Is KC57 YLZ safe to buy?
The MOT history for KC57 YLZ shows 19 tests with a 63.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KC57 YLZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KC57 YLZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.