MOT Status
ExpiredMileage
200,711 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Front Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front wishbone rear bush (5.3.4 (a) (i))
Nearside Front Upper Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Upper Macpherson strut mounting corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
underside undersealed
Horn not working (7.7 (a))
Nearside Front Anti-roll bar pin or bush excessively worn 'D' bush (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg area (6.1.1 (c) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Central Front Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Integral body structure is corroded but structural rigidity is not significantly reduced underside corroded (6.1.1 (c) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front wishbone rear bush (5.3.4 (a) (i))
Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement top mount bearing (5.3.4 (a) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut mounting area (5.3.6 (a) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Shock absorbers has slight external damage to the casing corroded near top mount (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement top mount bearing (5.3.4 (a) (i))
Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive strut mounting area (5.3.6 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Central Front Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front wishbone rear bush (5.3.4 (a) (i))
Nearside Front Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule both hoses (1.1.12 (f) (i))
Nearside Rear Suspension component corroded but not seriously weakened shock absorber (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))
Nearside Rear Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule both hoses (1.1.12 (f) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))
Offside Rear Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Central Front Lower Engine mounting damaged but not to excess (6.1.8 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front wishbone rear bush (5.3.4 (a) (i))
Nearside Front Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule both hoses (1.1.12 (f) (i))
Nearside Rear Suspension component corroded but not seriously weakened shock absorber (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))
Nearside Rear Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Offside Rear Brake hose has slight corrosion to ferrule both hoses (1.1.12 (f) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mount area (5.3.6 (a) (i))
Offside Rear Upper Coil spring mounting corroded but not seriously weakened (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Central Rear Lower Engine mounting damaged but not to excess engine mount bush (6.1.8 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front wishbone rear bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mount area (5.3.6 (a) (i))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mount area (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Central Brake cable damaged handbrake cable broken (1.1.15 (a))
Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside All direction indicators not working (4.4.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Central Rear Lower Engine mounting damaged but not to excess engine mount bush (6.1.8 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))
Nearside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement front wishbone rear bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mount area (5.3.6 (a) (i))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive trailing arm mount area (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Sub-frame pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement Inner D Bush (5.3.4 (a) (i))
Nearside Front Power steering component has slight seepage from a component Rack Boot Area (2.1.5 (a))
Offside Rear Brake hose has slight corrosion to ferrule To Axle (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule To Caliper (1.1.12 (f) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement Inner D Bush (5.3.4 (a) (i))
Nearside Front Power steering component has slight seepage from a component Rack Boot Area (2.1.5 (a))
Offside Rear Brake hose has slight corrosion to ferrule To Axle (1.1.12 (f) (i))
Offside Rear Brake hose has slight corrosion to ferrule To Caliper (1.1.12 (f) (i))
Central Front Seat belt slightly damaged (7.1.2 (b) (i))
Front Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake hose has slight corrosion to ferrule Both To Axle (1.1.12 (f) (i))
Rear Position lamp slightly affected by the operation of another lamp Both (4.2.3 (c))
Front Headlamp aim projected beam image is obviously incorrect Both (4.1.2 (c))
Nearside Front Power steering component leaking From Rack Boot (2.1.5 (a))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Central Front Seat belt slightly damaged (7.1.2 (b) (i))
Front Inner Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake hose has slight corrosion to ferrule Both To Axle (1.1.12 (f) (i))
Rear Position lamp slightly affected by the operation of another lamp Both (4.2.3 (c))
Brake hose has slight corrosion to ferrules o/s & n/s rear (3.6.B.4e)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
both rear shock absorber covers detatched
n/s/r tyre 2000 miles
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Horn not working (1.6.2a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Brake hose has slight corrosion to ferrules o/s & n/s rear (3.6.B.4e)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
both rear shock absorber covers detatched
n/s/r tyre 2000 miles
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Outer Brake pipe slightly corroded (3.6.B.2c)
Centre Stop lamp not working (1.2.1b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Horn not working (1.6.2a)
Nearside Headlamp not working on main beam (1.7.5a)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Outer Brake pipe slightly corroded (3.6.B.2c)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
centre seat belt frayed ok for test
n/s/r brake disc back plate excessively corroded
o/s/r shock absorber cover broken
n/s back plate rusted
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
n/s back plate rusted
Inner Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Inner Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
o/s/f tyre cut on inner wall
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear wheel bearing has slight play (2.6.2)
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KD05 EPN is a 2005 Vauxhall Vivaro in White with a 1,870cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2005 Vauxhall Vivaro models, the average MOT pass rate is 65.8% with a typical mileage of 107,499 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying KD05 EPN, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 21 years old, this Vauxhall Vivaro is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KD05 EPN?
You can check the full history of KD05 EPN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KD05 EPN registered?
KD05 EPN is a 2005 Vauxhall Vivaro, first registered on 30 April 2005.
Is KD05 EPN safe to buy?
The MOT history for KD05 EPN shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KD05 EPN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KD05 EPN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.