2006 Toyota Aygo

Brake pipe corroded, covered in grease or other material rear to front (1.1.11 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

surface corrosion throughout under side

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

surface corrosion throughout under side

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

surface corrosion throughout under side

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

surface corrosion throughout under side

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/suspension mounting (6.1.1 (c) (i))

Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/suspension mounting (6.1.1 (c) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust has a minor leak of exhaust gases at rear clamp (6.1.2 (a))

Battery insecure (1.9.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front front brakes release unevenly (3.7.B.4)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pipe excessively corroded front to rear (3.6.B.2c)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

front brake application uneven (3.7.B.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Items removed from driver's view prior to test

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)