2006 Toyota Aygo

Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Body panel insecure (6.2.1 (a) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Brake pipe corroded, covered in grease or other material front to rear close to flexi hose (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material going to cylinder (1.1.11 (c))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Hydraulic brake cylinder insecurely mounted bolt missing (1.1.16 (c) (i))

Nearside Brake pipe corroded, covered in grease or other material front to rear close to flexi hose (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material going to cylinder (1.1.11 (c))

Offside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at axle mount (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer and inner sill (5.3.6 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

osr light unit cracked

Brake pipe corroded, covered in grease or other material rear both sides (1.1.11 (c))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement x2 (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive sub frame (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Road wheel fixing missing wheel bolt (5.2.1 (a) (i))

Offside Front Body component insecure headlamp (6.2.1 (a) (i))

Offside Front Bumper insecure (6.1.4 (a) (i))

Offside Front Road wheel fixing missing wheel bolt (5.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Service brake excessively binding both side (1.2.1 (f))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement x2 (5.3.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive sub frame (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake lining(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Offside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both rear, front to rear brake pipes greased

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)