MOT Status
ExpiredMileage
137,279 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure (1.9.1)
Electrical wiring insecure Negative battery terminal (1.9.2a)
Electrical wiring insecure Positive battery terminal (1.9.2a)
Emissions not tested (7.3.A.1)
Exhaust has a major leak of exhaust gases Back box (7.1.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front position lamp(s) incorrect colour (1.1.A.3e)
Nearside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear reflector missing (1.5.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Stop lamp not working (1.2.1b)
Nearside Front Sill corroded
Nearside Rear Seat belt occasionally did not latch
Offside Front wheel slightly binding
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
sills have corrosion
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Exhaust emits excessive dense blue smoke during acceleration (7.3.A.2c)
Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
sills have corrosion
Engine covers fitted obscuring some components in the engine bay
underside vehicle rusty condition.
Battery insecure (1.9.1)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front front brake binding (3.7.B.1)
Engine covers fitted obscuring some components in the engine bay
underside vehicle rusty condition.
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust heat shield corroded
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
exhaust heat shield corroded
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
rear exhaust hanger broken
underbody surface corrosion
Offside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Wheel nut(s) missing (4.2.A.1e)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
rear exhaust hanger broken
underbody surface corrosion
Brakes imbalanced across an axle (3.7.B.5b)
Nearside rear brake application uneven (3.7.B.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
heavy corrosion on inner braking surfaces of both rear brake discs
inner braking surface heavily corroded on front brake discs
Offside Front Front wheel bearing has excessive play (2.5.A.3c)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
ALL THE BRAKE PIPES ARE PLASTIC COATED
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
NEARSIDE AND OFFSIDE INNER AND OUTER SILLS HAVE BEEN CHECKED..APPLIED FINGER AND THUMB PRESSURE AS PER THE M.O.T MANUAL
Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
OFFSIDE UPPER PART OF THE WINDSCREEN HAS A STICKER ON THE SCREEN..NOT AFFECTING DRIVERS VIEW
Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Brakes imbalanced across an axle (3.7.B.5b)
ALL THE BRAKE PIPES ARE PLASTIC COATED
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
NEARSIDE AND OFFSIDE INNER AND OUTER SILLS HAVE BEEN CHECKED..APPLIED FINGER AND THUMB PRESSURE AS PER THE M.O.T MANUAL
Nearside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
OFFSIDE UPPER PART OF THE WINDSCREEN HAS A STICKER ON THE SCREEN..NOT AFFECTING DRIVERS VIEW
Offside Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Trailing arm corroded but not seriously weakened (2.4.G.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KD55 YZN is a 2005 Mazda 6 in Silver with a 1,798cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 50%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying KD55 YZN, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KD55 YZN?
You can check the full history of KD55 YZN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KD55 YZN registered?
KD55 YZN is a 2005 Mazda 6, first registered on 31 October 2005.
Is KD55 YZN safe to buy?
The MOT history for KD55 YZN shows 16 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KD55 YZN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KD55 YZN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.