2003 Honda CBR600RR

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

All direction indicators not working (4.4.1 (a) (ii))

Rear Registration plate does not conform to the specified requirements (0.1 (d))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Stop lamp not working foot (4.3.1 (a) (ii))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Indicator switch inoperative (4.4.2 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Front Position lamp not working (4.2.1 (a))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Stop lamp missing (4.3.1 (a) (ii))

Front Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) DANGEROUS

Offside Front Brake hose damaged and likely to fail (1.1.12 (a)) DANGEROUS

Rear Rear reflector missing (4.8.2 (a) (ii))

Fuel cap ineffective (6.1.3 (b) (i))

Nearside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Stop lamp not working When rear brake applied (4.3.1 (a) (ii))

Rear Brake hose connection leaking (1.1.12 (c)) DANGEROUS

Front Brake hose slightly damaged (1.1.12 (b) (i))

Rear reflector obviously incorrectly positioned (4.8.2 (a) (i))

Nearside Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Registration plate deteriorated (6.3.1d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Front shock absorber has light misting of stanchion (2.3.3)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear Brake disc(s) slightly worn (3.2.A1l)

baer ends missing

Headlamp insecure (1.2.3b)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Front shock absorber has light misting of stanchion (2.3.3)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Rear Brake disc(s) slightly worn (3.2.A1l)

baer ends missing

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake disc(s) slightly scored (3.2.A1l)

Steering control has reduced clearance at full lock not affecting the riders grasp of handlebars (2.1.2b)

head light has no pattern

Headlamp aim headlamp damaged and function impaired (1.2.3a)

Inner Steering lock stop ineffective (2.1.3)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake disc(s) slightly scored (3.2.A1l)

head light has no pattern

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Wheel alignment slightly misaligned. (2.5.1)

Front Tyre worn close to the legal limit (4.1.3(ii))