2005 Yamaha Wr 250 F

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Suspension arm pin, bush or joint worn but not resulting in excessive movement Swingarm bearings. (5.3.4 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Position lamp showing white light to the rear (4.2.3 (a) (ii))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Suspension arm pin, bush or joint worn but not resulting in excessive movement Swingarm bearings. (5.3.4 (a) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement swingarm bearings and rear shock linkage (5.3.4 (a) (i))

Clutch lever shortened (6.2.7 (b))

Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Clutch lever shortened (6.2.7 (b))

Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Stop lamp not working (4.3.1 (a) (ii))

Offside Front Steering control has reduced clearance at full lock not affecting the riders operation of the controls (2.1.2b)

Rear Rear suspension bush has slight free play (2.4.A2a(i))

Drive chain excessively loose (6.2.1d)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Horn missing (1.7.1)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Position lamp switch does not operate the front and rear position lamps (1.1.4c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear suspension component seized (2.4A2a(ii))

Front Drive chain sprocket slightly worn (6.2.1e)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain sprocket slightly worn (6.2.1e)

Steering movement slightly 'notchy' (2.2.1a)

Drive chain excessively loose (6.2.1d)

Front Front wheel bearings are excessively rough (2.3.5b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings have excessive free play (2.3.5b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension component seized (2.4A2a(ii))

Rear wheel bearings are excessively rough (2.4.A.2c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Horn missing (1.7.1)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Position lamp switch does not operate the front and rear position lamps (1.1.4c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear suspension component seized (2.4A2a(ii))

Offside Front shock absorber has light misting of stanchion (2.3.3)

No lights fitted at time of test

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Centre Front position lamp does not illuminate immediately when switched on (1.1.3a)