2008 Chevrolet Matiz

Front Anti-roll bar pin or bush excessively worn both sides (5.3.4 (a) (i))

Front Headlamp has a product on the lens so that the light output is severely reduced both (4.1.4 (b))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp has a product on the light source but not seriously reducing light output both (4.1.4 (b))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources not working (4.7.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement bushes cracking (5.3.4 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure from insides wall (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has a tear, caused by separation or partial failure of its structure on wall (5.2.3 (d) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement bushes cracking (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively both sides (3.4 (b) (ii))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

exhaust is very rusty esp front mounting

f/n/s tyre perished & found low on pressure 20lb inflated

f/o/s tyre is badly perished

hand brake requires adjusting

headlamps have deteorated

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

exhaust is very rusty esp front mounting

f/n/s tyre perished & found low on pressure 20lb inflated

f/o/s tyre is badly perished

hand brake requires adjusting

headlamps have deteorated

exhaust is very rusty

front tyres are perished

hand brake requires adjusting

exhaust is very rusty

front tyres are perished

hand brake requires adjusting

exhaust is very rusty

f/o/s tyre is badly worn at inner edge

r/o/s tyre is perished and splitting in tread

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

exhaust is very rusty

f/o/s abs sensor ring is damaged

f/o/s tyre is badly worn at inner edge

r/o/s tyre is perished and splitting in tread

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Offside Headlamp not working on dipped beam (1.7.5a)