2008 Chevrolet Matiz

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

Anti-roll bar pin or bush worn but not resulting in excessive movement both sides at front (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both outer sills at rear (5.3.6 (a) (i))

Front Brakes imbalanced across an axle by more than 50% 60% (1.2.1 (b) (ii)) DANGEROUS

Anti-roll bar pin or bush worn but not resulting in excessive movement both sides at front (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases at front pipe, after flexi (6.1.2 (a))

Nearside Front Brake pipe excessively corroded feed to flexi (1.1.11 (c))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))

bonnet secondary catch does not secure the bonnet

Suspension arm ball joint excessively worn both front lower (5.3.4 (a) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Brake pipe excessively corroded to rear (1.1.11 (c))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brakes imbalanced across an axle 50% (3.7.B.5b)

Nearside Front Brake pipe leaking to rear(at join) (3.6.A.1)

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Rear Upper Shock absorber has a slightly worn bush (2.7.4)

o/s rear hub noisey

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear brake application uneven (3.7.B.2)

rear brake binding (3.7.B.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Upper Shock absorber has a slightly worn bush (2.7.4)

n/s rear tyre worn on edges

n/s rear tyre worn inner edge

Nearside rear brake binding (3.7.B.1)

n/s rear tyre worn inner edge