2008 Mercedes-benz Vito

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Prop shaft bearing likely to break up (6.1.7 (b) (ii)) DANGEROUS

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake hose slightly damaged (1.1.12 (b) (i))

Offside Headlamp lens slightly defective cracked (4.1.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Tyre(s) of different sizes are fitted on the same axle. both front (5.2.3 (b))

Tyre tread depth below requirements of 1.6mm both rear (5.2.3 (e)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake hose slightly damaged (1.1.12 (b) (i))

Offside Headlamp lens slightly defective cracked (4.1.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Oil leaking continuously from engine posing a serious risk to road safety (8.4.1 (a) (ii)) DANGEROUS

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Stop lamp not working (1.2.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

rear brake application uneven (3.7.B.2)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Front registration plate insecure (6.3.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Rear registration plate character(s) likely to be misread (6.3.4b)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)