2001 Aprilia Pegaso 650

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Suspension arm ball joint worn, but not excessively (5.3.4 (a) (i))

Exhaust noisy (8.1.1 (a))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Indicator switch insecure (4.4.2 (a) (i))

Offside Handlebar deformed but serviceable (2.2.1 (c) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Drive chain sprocket slightly loose cush rubbers worn (6.1.7 (c) (i))

Rear Wheel bearing has slight play in sprocket carrier (5.1.3 (a) (i))

Wheel alignment slightly misaligned (2.4 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Rear Lower shock absorber bearing has rust appearing from it. further inspection required

Front Brake excessively binding (1.2.1 (f))

Offside Headlamp aim too high and too far to the right (4.1.2 (a))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Offside fairing panel insecure

Rear Lower rust appearing from bearing. further inspection required

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Wheel alignment slightly misaligned. (2.5.1)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Drive chain slightly loose (6.2.1d)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain sprocket slightly worn (6.2.1e)

Headlamp masks/converters fitted

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain worn to excess (6.2.1e)

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim beam image kick up to the offside (1.6)

Drive chain sprocket slightly worn (6.2.1e)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Headlamp aim beam image kick up to the offside (1.6)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

one brake light bulb not working (of two)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Oil leak

Headlamp aim beam image kick up to the offside (1.6)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber seal failed and leaking oil (2.4.A.1c)