2000 Peugeot 206

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

engine high idle

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Oil leak

Brake load sensing valve linkage seized (3.6.E.3)

Centre Stop lamp remains on when the brakes are released (1.2.1e)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Stop lamp remains on when the brakes are released (1.2.1e)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

front brakes release unevenly (3.7.B.4)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Oil leak

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

engine pulley noise

exhaust loose

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Lower Ball joint has slight play (2.2.B.1f)

auxhilary belt insecure

Centre Rear fog lamp not working (1.3.2b)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc excessively scored (3.5.1h)

Suspension joint nearside lower dust cover split/missing

Nearside Front Headlamp aim too low (1.8)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim beam image kick up to the offside (1.8)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Suspension joint nearside lower dust cover split/missing

Brake pad(s) wearing thin (3.5.1g)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

cut n/s/r tyre inner sidewall

Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

cut n/s/r tyre inner sidewall

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Wheel insecure (4.2.A.1c)