MOT Status
ExpiredMileage
53,221 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill (6.1.1 (c) (i))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Axle swivel pins and bushes swivel pin and/or bush slightly worn both rear (5.1.2 (b) (i))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge inner edge wearing (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive strut tower (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement both front (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced Nearside front chassis leg and jacking point, various areas underneath car corroded. (6.1.1 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Suspension arm pin or bush worn but not resulting in excessive movement both front lower (5.3.4 (a) (i))
Tyre slightly damaged/cracking or perishing all tyres (5.2.3 (d) (ii))
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Brake pipe excessively corroded to rear (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Suspension arm pin or bush worn but not resulting in excessive movement both front lower (5.3.4 (a) (i))
Tyre slightly damaged/cracking or perishing all tyres (5.2.3 (d) (ii))
Axle swivel pins and bushes swivel pin and/or bush slightly worn both rear axle bushes worn (5.1.2 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both front sills (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Axle swivel pins and bushes swivel pin and/or bush slightly worn both rear axle bushes worn (5.1.2 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both front sills (6.1.1 (c) (i))
Offside Rear Tyre slightly damaged (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Front tyres are wearing on the edges
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Oil leak ()
Spare tyre defective ()
nearside and offside front floor is corroded
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KEZ 3087 is a 2006 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 10 MOT tests with a personal pass rate of 60%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying KEZ 3087, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KEZ 3087?
You can check the full history of KEZ 3087 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KEZ 3087 registered?
KEZ 3087 is a 2006 Ford Ka, first registered on 29 September 2006.
Is KEZ 3087 safe to buy?
The MOT history for KEZ 3087 shows 10 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KEZ 3087 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KEZ 3087. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.