MOT Status
ExpiredMileage
110,906 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Airbag warning light on
Child seat fitted not allowing full inspection of adult belt
Engine sump corroded
Front exhaust pipe heatshield corroded
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Airbag warning light on
Child seat fitted not allowing full inspection of adult belt
Coolant level low
Engine sump corroded
Front exhaust pipe heatshield corroded
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Body has slight corrosion (6.1.B.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Vehicle structure has slight corrosion (6.1.A.1)
rear brake discs pitting
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Registration plate lamp not working (1.1.C.1d)
Body has slight corrosion (6.1.B.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Vehicle structure has slight corrosion (6.1.A.1)
rear brake discs pitting
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Rear brake disc slightly pitted (3.5.1h)
Vehicle structure has slight corrosion (6.1.A.1)
o/s/r tyre tread wearing low
ENGINE SUMP CORRODED
Offside Front Tyre worn close to the legal limit (4.1.E.1)
REAR EXHAUST BOX JOINT CORRODED
ENGINE SUMP CORRODED
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
REAR EXHAUST BOX JOINT CORRODED
REAR EXHAUST JOINT RUSTY
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g) DANGEROUS
FRONT BRAKE PADS LOW
FRONT EXHAUST HEAT SHIELD LOOSE
REAR EXHAUST JOINT RUSTY
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Mazda Premacy?
Based on 131,632 MOT tests across 10,038 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KF02 CNC is a 2002 Mazda Premacy in Blue with a 1,991cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 54.5%.
Across all 2002 Mazda Premacy models, the average MOT pass rate is 70.5% with a typical mileage of 70,368 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Premacy fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 8,246 recorded failures. If you're considering buying KF02 CNC, it's worth having these areas checked by a mechanic before committing.
The Mazda Premacy typically stays on UK roads for around 27 years. At 24 years old, this Mazda Premacy is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KF02 CNC?
You can check the full history of KF02 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KF02 CNC registered?
KF02 CNC is a 2002 Mazda Premacy, first registered on 9 March 2002.
Is KF02 CNC safe to buy?
The MOT history for KF02 CNC shows 11 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KF02 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KF02 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.