2003 Citroen Relay

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Suspension arm pin or bush excessively worn ns+os (5.3.4 (a) (i))

Headlamp light intensity severely reduced ns+os (4.1.4 (a))

Nearside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Nearside Front Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp aim too low (4.1.2 (a))

Offside Side repeater not working (4.4.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Loading door cannot be secured in the closed position (6.2.1 (e))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Brake hose slightly chafed (1.1.12 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Play in steering rack inner joint(s) ()

Rear Suspension component mounting prescribed area is corroded but not considered excessive ns+os (5.3.6 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Loading door cannot be secured in the closed position (6.2.1 (e))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Drive shaft joint constant velocity boot missing (6.1.7 (g) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Front Upper Shock absorbers has slight external damage to the casing (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Headlamp aim too low (4.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Front Upper Shock absorbers has slight external damage to the casing (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on dipped beam (1.7.5a)

Offside rear parking (secondary) brake grabbing severely (3.7.B.6b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp not working on dipped beam (1.7.5a)

Oil leak