MOT Status
ExpiredMileage
141,433 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer not working (3.5 (a))
Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement D bushes (5.3.4 (a) (i))
Headlamp lens slightly defective (4.1.1 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust system insecure (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Headlamp lens slightly defective (4.1.1 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Emissions not tested (8.2.2.2 (e))
Headlamp aim projected beam image is obviously incorrect lenses dull (4.1.2 (c))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner outer (6.1.1 (c) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner outer (6.1.1 (c) (i))
Offside Rear Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Windscreen washer not working (3.5 (a))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Anti-roll bar pin or bush excessively worn D bushs (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Anti-roll bar pin or bush excessively worn D bushes (5.3.4 (a) (i))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement D bushes (2.4.G.2)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Registration plate lamp does not illuminate simultaneously with the position lamps (1.1.C.1a)
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement D bushes (2.4.G.2)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Stop lamp not working (1.2.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Front coil spring broken (2.4.C.1a) DANGEROUS
Brake pipe slightly corroded (3.6.B.2c)
Front Brake hose slightly deteriorated both (3.6.B.4d)
Front Tyre worn close to the legal limit both (4.1.E.1)
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement D bushes (2.4.G.2)
Front Brake hose slightly deteriorated both (3.6.B.4d)
Rear Tyre worn close to the legal limit both (4.1.E.1)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear coil spring incomplete (2.4.C.1a)
Nearside Stop lamp not working (1.2.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear coil spring incomplete (2.4.C.1a)
Front Brake hose slightly deteriorated (3.6.B.4d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KF05 SBO is a 2005 Mercedes-benz Vito in White with a 2,148cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2005 Mercedes-benz Vito models, the average MOT pass rate is 68.7% with a typical mileage of 113,960 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying KF05 SBO, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 21 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of KF05 SBO?
You can check the full history of KF05 SBO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KF05 SBO registered?
KF05 SBO is a 2005 Mercedes-benz Vito, first registered on 31 March 2005.
Is KF05 SBO safe to buy?
The MOT history for KF05 SBO shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KF05 SBO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KF05 SBO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.