2015 Honda Cbr

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Upper Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake component insecure break hose (1.1.21 (c))

Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear Upper Shock absorber has an excessively worn bush top bush (5.3.2 (c))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Offside Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking (6.2.7 (a) (ii)) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Tyre worn close to the legal limit (5.2.3 (e))

Clutch lever bent (6.2.7 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Upper Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake pad(s) contaminated (1.1.13 (b))

Headlamp aim too low (4.1.2 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Offside Front Headlamp insecure main beam bulb insecure (4.1.1 (c))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Position lamp not working (4.2.1 (a))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Clutch lever bent (6.2.7 (b))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Upper Suspension pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Clutch lever bent (6.2.7 (b))

Clutch lever bent (6.2.7 (b))

Headlamp aim too low (4.1.2 (a))

Clutch lever bent (6.2.7 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Clutch lever bent (6.2.7 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Clutch lever bent (6.2.1g)