2005 Mazda 6

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill marked in yellow chalk (5.3.6 (a) (i))

Offside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))

Offside Front Tyre worn close to the legal limit Edges (4.1.E.1)

Suspension component mounting prescribed area is corroded but not considered excessive Both rear outer sills (2.4.A.3)

Front Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Inner Brake pad(s) less than 1.5 mm thick (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

rear parking brake recording little or no effort Both (3.7.B.6a)

Offside Front Tyre worn close to the legal limit Edges (4.1.E.1)

Suspension component mounting prescribed area is corroded but not considered excessive Both rear outer sills (2.4.A.3)

Both rear parking brakes recording low effort

Front Inner Brake pad(s) wearing thin (3.5.1g)

Rear exhaust bracket rusty

Tyre worn close to the legal limit Both front on edges (4.1.E.1)

Both rear parking brakes recording low effort

Front Inner Brake pad(s) wearing thin (3.5.1g)

Rear exhaust bracket rusty

Registration plate lamp not working (1.1.C.1d)

Tyre worn close to the legal limit Both front on edges (4.1.E.1)

Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

n/s/r tyre perished

Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Brake pad(s) wearing thin (3.5.1g)

Registration plate lamp not working (1.1.C.1d)

n/s/r tyre perished

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front registration plate deteriorated (6.3.1d)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Body has slight corrosion (6.1.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Body has slight corrosion (6.1.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)