MOT Status
ExpiredMileage
143,389 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner and outer sill. (6.2.2 (d) (i))
Nearside Rear Brake disc significantly and obviously worn Scored by disc pad back. (1.1.14 (a) (i))
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill area. (6.2.2 (d) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill area. (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill area. (6.2.2 (d) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick On metal. (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Undertray fitted
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Position lamp not working (4.2.1 (a))
Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Undertray fitted
Light corrosion on underside
Undertray fitted
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear exhaust corroded
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front coil spring fractured (2.4.C.1a)
Offside Rear coil spring fractured (2.4.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KG05 CWV is a 2005 Mazda 6 in Blue with a 1,999cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 80%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying KG05 CWV, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KG05 CWV?
You can check the full history of KG05 CWV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KG05 CWV registered?
KG05 CWV is a 2005 Mazda 6, first registered on 24 March 2005.
Is KG05 CWV safe to buy?
The MOT history for KG05 CWV shows 15 tests with a 80% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KG05 CWV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KG05 CWV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.