MOT Status
ExpiredMileage
91,510 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front headlamp is slightly deteriorated (faded)
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear water in spare wheel well
dual mass flywheel is noisy
general underbody corrosion to suspension components
Nearside Position lamp not working (4.2.1 (a) (ii))
Offside Front Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front headlamp is slightly deteriorated (faded)
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear water in spare wheel well
dual mass flywheel is noisy
general underbody corrosion to suspension components
Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar linkage ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS
Offside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Exhaust emissions test aborted because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
engine cover fitted obscuring some testable items
exhaust system corroding
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear rear parking (secondary) brakes imbalanced (3.7.B.6b)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both front and rear suspension axels are corroded
both front tyres are worn on edges
exhaust system is corroded
vehicle has covers fitted unable to see certain testable items
Nearside Rear Brake cable has restricted free movement (3.5.1k)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Body has slight corrosion both side (6.1.B.2)
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Rear Brake pad(s) wearing thin (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
all 4 tyres wearing low & worn on inner & outter edges,
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
KG05 XXS is a 2005 Mazda 6 in Black with a 1,998cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying KG05 XXS, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of KG05 XXS?
You can check the full history of KG05 XXS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was KG05 XXS registered?
KG05 XXS is a 2005 Mazda 6, first registered on 12 March 2005.
Is KG05 XXS safe to buy?
The MOT history for KG05 XXS shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does KG05 XXS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on KG05 XXS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.