2005 Mazda 6

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

fuel filler neck corroded

Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

fuel filler neck corroded

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Brake pad(s) wearing thin getting low (1.1.13 (a) (ii))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

both rear brake discs corroding

offside rear outer arch corroding

Offside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Brake pad(s) wearing thin getting low (1.1.13 (a) (ii))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

both rear brake discs corroding

offside rear outer arch corroding

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

fuel filler neck corroding

offside front brake dragging

Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

fuel filler neck corroding

offside front brake dragging

both rear brake discs going rusty

nearside front brake disc scored

nearside rear inner and outer sills going rusty

offside and nearside front brakes are dragging

offside rear inner sill going rusty

rear sub frame going rusty

rear chassis starting to corrode and rear pads low

front brake application uneven (3.7.B.2)

Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside front brake binding (3.7.B.1)

rear chassis starting to corrode and rear pads low

Nearside Front Tyre worn close to the legal limit just in 1.6mm (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Rear Anti-roll bar linkage insecure (2.4.G.1)

Nearside Rear Lower Suspension arm corroded and seriously weakened (2.4.G.1)

Nearside Stop lamp not working (1.2.1b)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside front brake binding (3.7.B.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit just in 1.6mm (4.1.E.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Lower Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

offside and nearside rear inner sills going rusty

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault air bag light (5.4.2)

offside and nearside inner sills going rusty

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Steering system slightly rough (2.2.D.1)

Offside Rear Suspension arm corroded and seriously weakened (2.4.G.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Steering system slightly rough (2.2.D.1)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

floor body seams rusty

rear spoiler loose

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)