2008 Mercedes-benz Vito

Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Prop shaft joint worn, but not excessively (6.1.7 (c) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust has a major leak of exhaust gases Centre box (6.1.2 (a))

Exhaust has a major leak of exhaust gases Rear pipe (6.1.2 (a))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Steering wheel has excessive movement up and down (2.2.2 (a))

Central Prop shaft bearing housing likely to fail (6.1.7 (f) (ii)) DANGEROUS

Nearside Rear Coil spring mounting insecure to the extent that relative movement is visible (5.3.1 (a) (ii)) DANGEROUS

Nearside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Emissions not tested (7.3.A.1)

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front coil spring broken (2.4.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Fuel cap/sealing device sealing washer torn (7.2.4c)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Brake pedal spongy (3.3.B.1b)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.C.1b)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear coil spring incomplete (2.4.C.1a)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear coil spring incomplete (2.4.C.1a)

Parking brake lever has no reserve travel (3.1.6b)