2003 Mercedes-benz Vito

Nearside Front Suspension component mounting prescribed area is excessively corroded chassis outrigger (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Inner Suspension component mounting prescribed area is excessively corroded cill (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded chassis outrigger (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Side repeater not working (1.4.A.2c)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear rear brake fluctuating, but not excessively (3.7.B.3)

exhaust system bent,wired up to mountings and front flange bolt missing .still adequately supported

ns rear tyre slightly out of shape

os rear tyre wearing badly and uneven on inner edge, advise replacement

os side repeater lens damaged

sills corroded in non perscribed areas

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Side repeater missing (1.4.A.2b)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Offside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

exhaust system slightly bent and wired up .still adequately supported

front exhaust flange bolt missing and has slight blow

ns front chassis slightly corroded

ns rear tyre slightly out of shape

os rear tyre wearing uneven on inner ege

outer sills corroded in non perscribed areas

rear brake readings fluctuating slightly

Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front brake fluctuating, but not excessively (3.7.B.3)

os rear tyre wearing uneven on inner edge

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too low (1.8)

Offside Rear coil spring broken (2.4.C.1a)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

front brake fluctuating, but not excessively (3.7.B.3)

os rear tyre wearing uneven on inner edge

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

nearside front inner drive shaft gaiter split

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Headlamp damaged but light output not reduced (1.7.5a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen wiper does not clear the windscreen effectively (8.2.2)